 |
| Идеи подарков | Подарки своими руками © |
Knitted Deer Amgurumi + description
Tail
2 identical parts of basic and white color. Let's start with the white.
We collect a chain of 8 air loops. On the first side of the chain in 2 of the hook loop: 1 PRSs, 1 PRSs, 1PSSN; 1 PRSPs; 1 SBN; 1 per hour On the second side of the chain: 1 SBN; 1 SBN; 1 PRSPs; 1 PRSPs; 1 PRSs; 1 PRSs.
On the white part of the thread fasten and trim, tie the second part (the base color)-and on it the thread is not cut, add both parts face outward, tie the edges together 12 SBN. Leave the tail for the stitching.
Legs 2 pcs
We start with white color.
1.6 in the ring
2. * RBR, D * X3 (9)
3. * 2 SBN, D * X3 (12)
Change color to additional (color scarf)
4.12 GB
Change the color on the main
5. * 3 SBN, D * X3 (15)
6-7 15
8. * 4 SBN, D * X3 (18)
9.18 SBN
10. * 5 SBN, D * X3 (21)
11.21 SBN
On the first leg of a thread to fasten and trim, on the second continue to Knit 3 VP.
Connect both legs:
12.21 on the left leg, 3 on the VP, 21 on the right leg, 3 on the VP (48)
13-15 R. 48
16. * 14 SBN, UB * X3 (45)
17-18 45 pm
19. * 13 SBN, UB * X3 (42)
20-21 42 PM
22. * 12 SBN, UB * X3 (39)
23-24 39 pm
25. * 11 SBN, UB * X3 (36)
26-27 36 PM
28. * 10 SBN, UB * X3 (33)
29-30 33 PM
31. * 9 SBN, UB * X3 (30)
32-33 30
34. * 8 SBN, UB * X3 (27)
35.27
36. * 7 SBN, UB * X3 (24)
37. * 6 SBN, UB * X3 (21)
38. * 5 SBN, UB * X3 (18)
39. * 4 SBN, UB * X3 (15) + 5 more
Leave a long tail, trim the thread
Handles 2 pcs
We begin to knit white yarn.
1.6 in the ring
2. * RBR, D * X3 (9)
3. * 2 SBN, D * X3 (12)
4.6 SBN, 3 PRSs with one vertex, 5 SBN (12)
5. The 12th
Change to additional color (scarf color)
6. The 12th
Change to the main color.
7-22 12
The filler is put only in the brush handle. Fold the top edges and tie them down. Leave tail for stitching
The handles are nailed under 2-3 near the edge of the neck.
Horns 3 details, each for 2 pieces.
Part 1 (2 pieces)
1.6 in the ring
2-7 6
Leave the tail for sewing, cut off the thread.
Part 2 (2 pieces)
1.6 in the ring
2-4 6
Leave the tail for sewing, cut off the thread.
Part 3 (2 pieces)
1.6 in the ring
2-3 6
Leave the tail for sewing, cut off the thread.
To the base of the horn sew branches.
Head
White.
1.6 in the ring
2. D X6 (12)
3. * RBR, D * 6 (18)
4. SBN, D, * 2 SBN, PR * х5, SBN (24)
5. * 3 SBN, D * X6 (30)
6.2 SBN, D, * 4 SBN, D * x 5, 2 SBN (36)
7. * 5 SBN, D * X6 (42 in)
8-12 42 PM
13. UB, 5 SBN * 6 (36)
14.2 SBN, UB, * 4 SBN, UB * х5, 2 SBN (30)
15. * 3 SBN, UB * X6 (24)
16. SBN, UB, * 2 SBN, UB * х5, SBN (18)
17. * SBN, UB * X6 (12)
18. UB X6 (6)
Finish knitting
Head pad
The foreground color.
1.6 in the ring
2. D X6 (12)3. * RBR, D * 6 (18)
4. SBN, D, * 2 SBN, PR * х5, SBN (24)
5. * 3 SBN, D * X6 (30)
6.2 SBN, D, * 4 SBN, D * x 5, 2 SBN (36)
7. * 5 SBN, D * X6 (42 in)
8-11 42 PM
12. UB, 5 SBN * 6 (36)
13.36
Next, knit the swivel plates on the spout.
14.6 SBN, VP, rotate
15.6 SBN, VP, rotate
16.6, turn (without the VP)
17. Skip 1 P, 5 sbn, rotate (no vp)
18. Skip 1 P, 4 SBN, rotate (no vp)
19. Skip 1 P, 3 SBN, 1 VP, rotate
20.3 SBN, 1 VP, rotate
21.3 SBN, rotate (without VP)
22. Skip 1 P, 2 SBN, 1 VP, rotate
23.2 SBN, 1 VP, rotate
24.2 SBN, 1 VP
Next you need to tie the whole detail on the edge of the SBN: 9 on the overlay on the spout, 30 on the "cap" and 9 on the second half of the spout, 1 VP + SS. Leave a long tail, trim the thread
Muzzle (spout)
White
1.5 SBN in a ring
2. PR X5 (10)
3-4 10
5. * 4 SBN, D) X2 (12)
Leave the tail for sewing, cut off the thread.
Ears
4 identical parts, 2 white and main color. Start with the white, the main will bind, as with the tail did
1.6 in the ring
2. D X6 (12)
3. * 1 SBN, d * x2, 1 SBN, * 1 PRSPs, 1 PRSs, 1 PRSPs *, * 1 SBN, D * X3 (19)
Trim the thread on the white part. Use a needle or hook to pull the thread into the next loop and back into the last loop. Fold together 2 parts and tie the main color of the thread: 9 SBN, * 1 PRSPs, 1 PRSs, 1 VP, 1 PRSs, 1 PSSG * in one loop, 9 SBN. Fold the eyelet and tie the lower part of the 4th and 1SS. Leave the tail, trim the thread.
Assembly
We collect the head. On a white ball it is necessary to put carefully a cap-overlay. Make sure that it turns out as smoothly as possible. Next, attach the spout, positioning it just below the middle of the muzzle. "Cap" is started to be pressed from the spout. Gently on the contour of the lining, further on the head and the second half of the spout. When the parts of the head are collected, the ears and horns are pressed. The white thread embroider specks on the forehead. The eyes and the spout embroider to your liking. The head is pressed to the torso. Attach the handles and tail.
Lic
Dial 13 VP, start in the second loop from the hook: 12 on the back wall, 1 VP, turn knitting. Knit to the desired length. The edges of the Snoud sew on the toy already.
